Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717

CATEGORY: Products

$449.00 $530.72

Envíos gratis en el día ✓ Compra en meses sin intereses y recibe tu ☞ Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 ❤ | 3D Printers......

Description Instruction FAQs Evaluation
Mosfet for a 3D printer. Use this mosfet to increase the speed at which your bed heats up, eliminating the need for your printer's primary credit card to be quenched. You just need to connect it to serve as a controller and let you have a better impression-giving experience. Características: Large heat dissipator to maintain low temperatures even after hours of impact The maximum current may be up to 30A. It may be used with both Ramps 1.4 and MKS cards. Can function with current

Introduction:

Thank you for purchasing the Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717. This high-quality Mosfet is designed to help protect your 3D printer's heated bed from overheating, making it safe to use for both adults and minors. Here is a step-by-step guide on how to use it.

Instructions:

  1. Disconnect your printer's power supply and remove the 3D printer's heated bed connections.
  2. Connect the Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 to your 3D printer's heated bed through the two input ports for the heating bed's wires.
  3. Connect the Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 to your 3D printer's power supply through the two output ports for the power wires.
  4. Connect the Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 to your 3D printer controller board by means of the two signal pins. Be sure to match the pins in the correct position and refer to the user manual of your controller board if necessary.
  5. Securely mount the Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 in a suitable place on your 3D printer to avoid any risk of electric shock or short circuit.
  6. Reconnect your power supply and power on your 3D printer. The Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 should now be active, monitoring and controlling the temperature of your printer's heated bed.

Note:

  • Always exercise caution when working with electronics, and make sure to disconnect the power before handling.
  • Make sure to properly secure the Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 to prevent any electrical shorts or fire hazards.
  • If you are unsure about any steps in the above process, seek assistance from a qualified technician or professional.

What is Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717?

Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 is an electronic switch with a heat sink that is designed to control the power supply of a 3D printer's heated bed. It provides an extra layer of safety by reducing the load on the printer's mainboard and preventing it from overheating.

What does it look like?

Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 looks like a small rectangular box with a black casing, heat sink, and input/output connectors. The product's dimensions are 60mm x 50mm x 30mm.

Is it safe to use?

Yes, Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 is designed with safety in mind. It comes with a heat sink that dissipates heat effectively, preventing the device from overheating. Additionally, it reduces the load on the printer's mainboard, which decreases the chances of burning out the board due to overload.

Does it have any installation instructions?

Yes, Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 comes with detailed installation instructions to ensure the correct installation and safe use of the product. Users are advised to follow the instructions carefully to avoid any issues during installation.

Can Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 be used with any 3D printer?

Yes, Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 can be used with any 3D printer that has a 12V or 24V power supply and a maximum current of 30A. Users are advised to check their 3D printer's compatibility before purchasing the product.

In conclusion, Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 is a safe and effective device that prevents overheating and overloading of a 3D printer's mainboard. It is easy to install and can be used with most 3D printers that meet its compatibility requirements.

The Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 is a powerful tool that enhances the performance of your 3D printer. This device is designed to efficiently regulate the power supply to your 3D printer's heated bed, ensuring that the temperature remains consistent and accurate.

One of the standout features of this Mosfet Para Impresora 3d is its impressive 30A current capacity, which is more than enough to meet the requirements of most 3D printers. With this device, you can rest assured that your heated bed will receive the power it needs to function at optimal levels, without the risk of overheating or short-circuiting.

In terms of appearance, the Mosfet Para Impresora 3d is a sleek, compact device that is easy to install and use. It features a durable aluminum case that protects it from wear and tear, and also helps dissipate heat effectively. Its compact size ensures that it won't take up too much space in your 3D printer's control box, which is especially valuable if you have limited space available.

Overall, the Mosfet Para Impresora 3d, 30a, Mks, Cama Caliente, Te717 is an excellent choice for anyone looking to improve the efficiency and safety of their 3D printer's heated bed. This device offers superior performance and reliability, all in a compact and easy-to-use package that's perfect for both novice and experienced users.